Sequential manual transmission – BMW 525i Sedan 2004 User Manual
Page 55
53
towards D or change the current gear using
the shift paddles or selector lever.
Gear changes
Using selector lever
>
To shift up, briefly press the selector
lever towards +
>
To shift down, briefly press towards —.
Using shift paddles on steering
wheel
>
To shift up, pull one of the shift paddles
>
To shift down, press.
You accelerate from higher gears, e.g.
when overtaking, by shifting down manu-
ally.
In the following situations, the SMG in the
sequential mode assists you:
>
Upshifts and downshifts are executed
only when they will result in a plausible
combination of engine and vehicle
speed; thus, for example, a downshift
that would cause the engine to overrev
will not be executed by the system
>
When the vehicle is stopped, the trans-
mission automatically downshifts into
first gear
>
Shortly before dropping below a gear-
dependent minimum speed, the trans-
mission downshifts automatically even
without your intervention.
Display in the instrument cluster
Gear display
R N 1 2 3 4 5 6
D1 D2 D3 D4 D5 D6
The gear currently selected, the selected
shifting mode and, if applicable, malfunc-
tions are displayed in the instrument clus-
ter.
Malfunctions
Indicator lamp
If the indicator lamp lights up, a
malfunction has occurred in the
transmission system.
While it will remain still possible to move
the selector lever to any desired position,
the transmission will revert to operation in
its default mode with only a limited number
of forward gears.
If this happens, avoid extreme engine loads
and consult the nearest BMW center.
Warning tone
In case of overheating in the area of the
transmission, an acoustic signal indicates
that you should stop or start off quickly if
possible so that the system can cool down
again.
Information on jump-starting and towing
begins on page
Online Edition for Part No. 01 41 0 157 647 - © 07/03 BMW AG