BMW 525i Sedan 2004 User Manual
Page 69
67
The display shows a list of selected service
and maintenance procedures, as well as
legally prescribed official inspections.
Symbols
The service deadline has already
passed.
The deadline for service or an official
inspection is approaching. Please
contact your BMW center for an appoint-
ment.
No service is currently required. If you
desire, certain maintenance opera-
tions can be carried out at the next service.
You can request more detailed information
on every entry.
Select the entry and press the controller.
To exit the menu:
Select
and press the controller
Entering dates for state emission and
vehicle inspections
Make sure the date in the Control
Center is always set correctly, refer to
, as otherwise the effectiveness of
Condition Based Service CBS is not
ensured.
<
Control Center, for principle details, refer to
page
1.
Open the menu
2.
Select "Service" and press the control-
ler
3.
Select "Service requirements" and
press the controller
4.
"Select Status" and press the controller
5.
Select "Emission inspect." or "State
inspection" and press the controller
6.
Select "Set service date" and press the
controller. The month is highlighted
7.
Turn the controller to make the adjust-
ment
8.
Press the controller to accept the set-
ting. The year is highlighted
9.
Turn the controller to make the adjust-
ment
10.
Press the controller to apply the setting.
The date entry is stored.
To exit the menu:
Select
and press the controller
Online Edition for Part No. 01 41 0 157 647 - © 07/03 BMW AG