Dako Autostainer Plus - Manual (Page 50)

50 Dako Autostainer Plus | User Guide
2. Select the GET TEMPLATE button. The GET TEMPLATE screen is displayed with the
cursor in the File Name box.
3. Select the template by clicking on it. The name appears in the file name box.
4. Press ENTER or click on the OK button. The PROTOCOL TEMPLATE DESIGN screen
appears with the selected protocol template displayed in the Protocol Outline column.
5. Click on the USE TEMPLATE button. The PROGRAMMING GRID appears with the
selected protocol template displayed in the grid header.
Using a Saved Protocol Template for a Specific Auto Program
NOTE: Auto Programming is a feature for making slide programming more efficient (see
Programming Slides section 10).
1. Select the PROTOCOL TEMPLATE button in the PROGRAMMING GRID. The
PROTOCOL TEMPLATE DESIGN screen appears with the default protocol template
displayed in the Protocol Outline column.
2. Select the GET TEMPLATE button. The GET TEMPLATE screen is displayed with the
cursor in the File Name box.
3. Check the Auto file check box. All Auto Program names will be displayed.
4. Select the desired Auto Program by clicking on it. The name appears in the file name box.
5. Press ENTER or click on the OK button. The PROTOCOL TEMPLATE DESIGN screen
appears with the selected Auto Program protocol template displayed in the Protocol
Outline column.
6. Click on the USE TEMPLATE button. The PROGRAMMING GRID appears with the
selected protocol template displayed in the grid header.
Selecting and Editing the Reagent Dispense Volume
NOTE: Low security level does not allow access to changing the reagent volumes for a Protocol
Template. Low level security users can change the volume for all slides using the All Slides control
on the SLIDE LAYOUT:PROGRAM SLIDES screen (see Programming Slides, section 10).
Selecting and Editing the Reagent Dispense Volume for All Steps in a
Protocol
1. Select the REAGENT VOLUME button in the upper right corner of the PROTOCOL
TEMPLATE DESIGN screen. The PROTOCOL STANDARD VOLUME dialog box
appears.