Dako Autostainer Plus - Manual (Page 27)

Dako Autostainer Plus | User Guide 27
7. Type in serial number, name, or unique identifier, for your Autostainer Plus and press
ENTER or TAB.
8. Select the OK button to save the entered information. The MAIN MENU screen is
displayed.
Select the CANCEL button to escape without saving the entered information. The MAIN
MENU screen is displayed.
Editing Institution Information
1. Select INITIALIZE on the MAIN MENU screen. The INITIALIZE screen is displayed with
the cursor in the Name box and the previously entered information listed.
2. Select the information to be changed and enter the new information.
3. Select the OK button to save the entered information. The MAIN MENU screen is
displayed. Select the CANCEL button to escape without saving the changes. The MAIN
MENU screen is displayed.
Entering Staff Information
Adding a New User
1. Select INITIALIZE on the MAIN MENU screen. The INITIALIZE screen is displayed with
the cursor in the Name box and the previously entered information is listed.
2. Press ENTER or TAB key until the cursor flashes in the Users box.
3. Type a user’s name and press ENTER. The PASSWORD AND SECURITY LEVEL
screen appears.
4. Type in a password for the new user in the Enter box and press ENTER. The cursor
moves to the Reenter box.
NOTE: Passwords are not case sensitive; capital and lower case letters may be
interchanged.