Canon PIXMA MX310 - Manual (Page 78)

74 Routine Maintenance
„ Cleaning the ADF
1
Open the Document Tray.
2
Open the Feeder Cover.
3
With a soft, clean, lint-free and dry cloth, wipe
off any paper dust from the inside of the
Feeder Cover (A).
4
After wiping, close the Feeder Cover by
pushing it until it clicks into place.
5
Close the Document Tray.
6
Reconnect the power cord then turn on the
machine.
„ Cleaning the Paper Feed Roller (Roller Cleaning)
Clean the paper feed roller if paper is not fed properly. Cleaning the paper feed roller will wear
the roller, so perform this only when necessary.
1
Make sure that the machine is turned on, and then remove any paper from the
Rear Tray.
2
Open the Paper Output Tray.
(1) Put your finger in the rounded indent beside the Paper Output Tray and open it gently.
(2) Open up and set the Output Tray Extension completely by pressing down the hollow on
its front side.
Caution
Be sure to turn off the power and disconnect the power cord before cleaning the machine.
(A)