Canon PIXMA MX310 - Manual (Page 50)

46 Faxing
z Redialing
There are two methods of redialing: Automatic redialing and Manual redialing. Automatic
redialing is enabled by default.
z Automatic Redialing
When using memory sending to send a document and the recipient’s line is busy, the
machine will redial the number after a specified interval.
You can customize the following automatic redialing settings:
• Whether or not the machine redials automatically
• The number of times the machine redials (1 to 10 times)
• The time interval between redials (1 to 99 minutes)
To change the automatic redialing settings, change the AUTO REDIAL settings in TX
SETTINGS under FAX SETTINGS.
z Manual Redialing
To redial the fax number last dialed with the Numeric buttons, press the Redial/Pause button.
Using Other Useful Sending Functions
„ Sending from Your Computer (Windows Only)
If the machine is connected to a computer, you can send faxes using the fax driver from any
application software that has a printing function. For details, refer to the FAX Driver Guide on-
screen manual.
„ Sending/Receiving Using ECM
This machine is set to send/receive faxes in ECM (Error Correction Mode). ECM automatically
corrects errors caused by connection troubles, cross-checking the sending and receiving
conditions at the sending and receiving ends.
Note
z The range of values you can set for the automatic redialing settings varies depending on
the country or region of purchase.
z To cancel automatic redialing while redialing is in progress, press the Stop/Reset button,
then follow the instructions on the LCD.
z To cancel automatic redialing when redialing is standing by, delete the unsent document
from the machine’s memory. For details, see “Printing or Deleting a Document in Memory”
on page 54.
Note
z For details on sending faxes, see “Sending Faxes (Memory Sending)” on page 43.
z To cancel manual redialing, press the Stop/Reset button.
Note
z If the sender’s or receiver’s fax is not ECM-compatible, the fax will be sent/received in the
standard mode.
z You can disable ECM sending/receiving. Refer to “ECM TX” and “ECM RX” in “FAX SETTINGS”
of the User’s Guide on-screen manual.
z If ECM sending/receiving is enabled, transmission speed may slow down depending on the line
or connection conditions.