Canon PIXMA MX310 - Manual (Page 57)

53 Faxing
Using Other Useful Receiving Functions
„ Memory Receiving
If the machine receives a fax under one of the following conditions, the machine will not be able
to print the received fax and will store it in its memory. “RECEIVED IN MEMORY” is displayed in
fax mode. When the problem is resolved as described, the fax stored in memory is printed
automatically.
z
Ink is low or has run out while receiving a fax: replace the FINE Cartridge.
z Paper size/type setting is incorrect: correct the paper size/type setting.
z Paper has run out while receiving a fax: load the paper and press the OK button.
z Output Tray is closed: open it.
z OFF is selected for AUTO PRINT RX: select ON.
z You pressed the Stop/Reset button to cancel printing of a fax: press the FAX button.
„ Remote Receiving
If the machine is located away from the telephone, pick up the handset and dial 25 (the remote
receiving ID) to receive faxes (remote reception).
z
If you use a rotary pulse line, temporarily switch your telephone to tone dialing. For details on
how to switch to tone dialing, see the instruction manual supplied with your telephone.
z If you have an answering machine connected to the machine that can carry out remote
control operations, the security code for this function may be the same as the remote
receiving ID. In this case, change the remote reception ID in REMOTE RX ID in REMOTE RX
in RX SETTINGS under FAX SETTINGS.
Remote reception can be disabled. Refer to “REMOTE RX” in “FAX SETTINGS” of the User’s
Guide on-screen manual.
Important
z The machine can store up to approximately 50 pages* of faxes in memory.
z If the memory becomes full, the machine cannot receive any more faxes. Print or delete the
documents stored in memory, and then contact the sender and have him/her resend them.
* When using ITU-T No.1 chart (Standard mode)