Canon EOS Rebel xsi - Manual (Page 33)

33
1 Remove the caps.
Remove the rear lens cap and the
body cap by turning them as shown
by the arrow.
2 Attach the lens.
Align the EF-S lens with the camera’s
white EF-S lens mount index and turn
the lens as shown by the arrow until it
clicks in place.
When attaching a lens other than an
EF-S lens, align the lens with the red
EF lens mount index.
3 On the lens, set the focus mode
switch to (autofocus).
If it is set to <MF> (manual focus),
autofocus will not operate.
4 Remove the front lens cap.
Mounting and Detaching a Lens
Mounting a Lens
EF-S lens mount index
EF lens mount index
Do not look at the sun directly through any lens. Doing so may cause
loss of vision.
If the front part (focusing ring) of the lens rotates during autofocusing, do
not touch the rotating part.
H73_01.fm Page 33 Monday, November 12, 2007 3:33 PM