Canon EOS Rebel xsi - Manual (Page 150)

d Transferring Images to a Personal Computer
150
3 Select the image to be
transferred.
Press the key to select an
image, then press the key to
place a checkmark on the upper
left.
Repeat this step for all the images
you want to transfer. You can select
up to 998 images to be transferred.
Press the button twice to
save the image selections to the card.
The menu will then reappear.
About [All image]
In step 2, if you select [All image], the
screen on the left will appear. If you then
select [Mark all on card] and press
<0>, up to 998 images will be
transferred in one batch.
If you select [Clear all on card] and
press <0>, all your image selections for
transfer will be canceled.
Do not put into the camera any images whose transfer order was set by a
different camera and then try to specify another transfer order. The images
in the transfer order might all be overwritten. Also, depending on the image
type, the transfer order may not be possible.
If a 1+73 image is selected for transfer, it will be counted as one
image even though both the RAW and JPEG images will be transferred
to the personal computer.
In step 3, press the button to see a three-image display. To
return to the single-image display, press the button.
H73_08.fm Page 150 Tuesday, November 13, 2007 7:41 PM