Canon EOS Rebel xsi - Manual (Page 24)

24
1 Remove the protective cover.
2 Attach the battery.
As shown in the illustration, attach the
battery securely.
To detach the battery, follow the
above procedure in reverse.
3 Recharge the battery.
For LC-E5
As shown by the arrow, flip out the
battery charger’s prongs and insert
the prongs into a power outlet.
For LC-E5E
Connect the power cord to the
charger and insert the plug into the
power outlet.
X Recharging starts automatically and
the charge lamp turns orange.
X When the battery is fully recharged,
the charge lamp will turn green.
It takes about 2 hours to fully
recharge a completely exhausted
battery.
The time required to recharge the
battery depends on the ambient
temperature and battery’s charge
level.
Recharging the Battery
LC-E5
LC-E5E
H73_01.fm Page 24 Tuesday, November 13, 2007 7:30 PM