Canon EOS Rebel xsi - Manual (Page 119)

119
Normally, the Self Cleaning Sensor Unit will eliminate most of the dust
visible on captured images. However, in case visible dust still remains,
you can append the Dust Delete Data to the image to later erase the
dust spots. The Dust Delete Data is used by Digital Photo Professional
(provided software) to erase the dust spots automatically.
Get a solid-white object (paper, etc.).
Set the lens focal length to 50mm or longer.
Set the lens focus mode switch to <MF> and set the focus to infinity
(
∞
). If the lens has no distance scale, look at the front of the lens
and turn the focusing ring clockwise all the way.
1 Select [Dust Delete Data].
Under the [2] tab, select [Dust
Delete Data], then press <0>.
2 Select [OK].
Select [OK] and press <0>. The
automatic self-cleaning of the sensor
will be performed, then a message
screen will appear. Although there will
be a shutter sound, a picture is not
taken.
3 Appending Dust Delete DataN
Preparation
Obtain the Dust Delete Data
H73_06.fm Page 119 Tuesday, November 13, 2007 7:38 PM