Canon EOS Rebel xsi - Manual (Page 29)

29
When you turn on the power for the first time or if the date/time has
been reset, the Date/Time setting screen will appear. Follow steps 3
and 4 to set the date/time. Note that the date/time appended to
recorded images will be based on this Date/Time setting. Be sure
to set the date/time.
1 Display the menu.
Press the button to display
the menu.
2 Under the [6] tab, select [Date/
Time].
Press the key to select the
[6] tab.
Press the key to select [Date/
Time], then press <0>.
3 Set the date and time.
Press the key to select the
date or time number.
Press <0> so is displayed.
Press the key to set the number,
then press <0>. (returns to
.)
4 Exit the menu.
Press the key to select [OK],
then press <0>.
X The date/time will be set.
Press the button to return
to the shooting settings display.
3 Setting the Date and Time
The date/time set will start from when you press <0> in step 4.
If you store the camera without the battery or if the camera’s battery
becomes exhausted, the date/time might be reset. If this happens, set
the date/time again.
H73_01.fm Page 29 Tuesday, November 13, 2007 7:30 PM