Canon EOS Rebel xsi - Manual (Page 147)

147
By connecting the camera to a personal computer, you can transfer
images from the camera’s card by operating the camera. This is called
direct image transfer.
Before connecting the camera to the personal computer, be
sure to install the bundled software (EOS DIGITAL Solution
Disk/CD-ROM) in the personal computer. For instructions on
how to install the software, see “CD-ROM Guide.”
1 Connect the camera to the
personal computer.
Turn off the camera’s power switch
before connecting it.
Use the interface cable that came
with the camera.
When connecting the cable plug to
the camera’s terminal, the
cable plug’s icon must face the
front side of the camera.
To the personal computer’s USB port,
connect the plug on other end of the
cable.
2
Set the camera’s power switch to
<1>.
When the program selection screen
appears on the personal computer,
select [EOS Utility].
When the camera model selection
screen appears, select your camera’s
model.
X The [EOS Utility] screen will appear
on the computer, and the direct image
transfer screen will appear on the
camera’s LCD monitor.
d Transferring Images to a Personal Computer
Preparation for Image Transfer
H73_08.fm Page 147 Monday, November 12, 2007 3:43 PM