Canon t2i 3.9 for Windows - Manual (Page 72)

71
1
2
3
4
5
Introduction
Contents at
a Glance
Basic
Operation
Advanced
Operation
Advanced
Image Editing
and Printing
Editing
JPEG/TIFF
Images
Index
Processing
Large Numbers
of Images
Reference
Transferring a RAW Image to Photoshop
A RAW image can be converted to a TIFF image (16bit) and transferred
to Photoshop.
Only one image can be transferred at a time. To send multiple images at
a time, refer to
p.87 .
Setting Work Color Space
A different work color space (p.126) from the default settings (p.80) can
be set for each image.
If you set an image with a color space different to the default setting and
then subsequently change the default color space setting
(p.80) , this
default setting will not be applied and the individually set color space will
remain.
Since only the image processing conditions information changes, the
color space of a RAW image can be changed at any time.
Select the [Tools] menu [Transfer to Photoshop].
¿ Photoshop starts up and the transferred image is displayed.
A single image can be transferred at a time
O Compatible versions of Photoshop are 7.0 or later.
O Transferred images are automatically converted to TIFF images
(16bit) to which an ICC profile
(p.125) is added. The ICC profile
contains information about [Preferences] (p.80) or work color
space set for each image as described below and the appropriate
color information is relayed to Photoshop.
O When you exit Photoshop, only the original RAW image remains,
and the transferred image will disappear. Saving the transferred
image as a separate image in Photoshop is highly recommended.
Select the [Adjustment] menu [Work color space]
color space to be set.
A color space set individually does not change even when the
default setting is changed
The color space of a RAW image can be changed freely as
many times as required
You can correct an image by pasting a section copied from another part
of the image to an unwanted part of the image.
1 Follow steps 1 to 3 in “Manually Erasing Dust (Repair
Function)”
(p.69) .
2 Specify the section to be copied.
O Click on the section that is to be the copy source while holding
down the key.
O To change the section that is to be the copy source, perform the
operation above again.
O To fix the position of the copy source, checkmark [Fix Copy
Source position].
3 Correct the image.
O Click or drag on the section you want to correct on the image. [ + ]
in the window indicates the copy source and [ ] indicates the
copy destination.
¿ The copied image is pasted in the position to which it was
dragged.
O For [Pen type], you can select from [Brush] (the pasted image’s
borders simulate a brush) and [Pencil] (the pasted image’s
borders are sharp).
4 Click the [OK] button to return to the main window.
¿ The [ ] mark (p.112) is displayed on a corrected image.
Erasing Unwanted Parts of an Image (Copy Stamp Function)
COP
Y