Dell OptiPlex 745 - Manual (Page 106)

6. Connect the power and data cables to the drive and to the system board.
7. Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.
8. Replace the computer cover (see Replacing the Computer Cover ).
9. Update your configuration information in system setup by setting the appropriate Drive option (0 or 1) under Drives. See System Setup .
10. Verify that your computer works correctly by running the Dell Diagnostics (see Dell Diagnostics ).
Back to Contents Page
1 optical drive
2 shoulder screws (3)
3 shoulder screw slots (2)
1 power cable
2 data cable
3 SATA optical drive connector