Yealink VP530 - Manual (Page 60)

User Guide for the VP530 IP Video Phone
48
2. Click the desired replace rule.
3. Edit the values in the Prefix and Replace fields.
4. Enter the desired line ID in the Account field or leave it blank.
5. Click Edit to accept the change.
To delete one or more replace rules via web user interface:
1. Click on Phone->Dial Plan->Replace Rule.
2. Select one or more replace rules by checking the check box(es).
3. Click Delete to delete the replace rule(s).
You can configure one or more dial-now rules on your phone. When the dialed out
number matches the dial-now string, the number will be dialed out automatically. For
example, a dial-now rule is configured as "2xx", then entering any three-digit string
begins with 2 will be dialed out automatically on the phone.
To add a dial-now rule via web user interface:
1. Click on Phone->Dial Plan->Dial-now.
2. Enter the desired value (e.g. 1234) in the Dial-now Rule field.
3. Enter the desired line ID in the Account field or leave it blank.
4. Click Add to add the dial-now rule.
When you enter the number “1234” using the keypad, the phone will dial out “1234”
automatically without pressing any key.
Note
Delay Time for Dial-now Rule
You can configure the interval for dial-now rules. That is, you can configure your phone
to dial out the phone number automatically, which matches a dial-now rule, after the
specified delay time.
To configure the timeout for dial-now rule via web user interface:
1. Click on Phone->Features.
2. Enter the time within 0-14 (in seconds) in the Time Out for Dial-now Rule field.
3. Click Confirm to accept the change.
Area codes are also known as Numbering Plan Areas (NPAs). They usually indicate
geographical areas in a country. This feature is necessary only when dialing outside the
You can also edit or delete the dial-now rule, refer to Replace Rule on page 47 for more
information.