Yealink VP530 User Manual
Page 32
User Guide for the VP530 IP Video Phone
20
2. Tap the pull-down list of Time Type and then select SNTP.
3. Tap the pull-down list of Time Zone and then select the time zone that applies to
your area. The default time zone is "+8 China(Beijing)".
4. Enter the domain names or IP addresses in the NTP Server 1 and NTP Server 2 fields,
respectively.
5. Tap the pull-down list of Daylight Saving and then select Automatic.
6. Press the Save soft key to accept the change or the Back soft key to cancel.
7. Tap to return to the idle screen.
Note
To configure the time and date manually via phone user interface:
1. Tap ->Basic->Date & Time.
2. Tap the pull-down list of Time Type and then select Manual.
3. Enter the specific date and time in the Date and Time fields.
4. Press the Save soft key to accept the change.
5. Tap to return to the idle screen.
for the list of available time zones on the IP video
phone.