Yealink VP530 - Manual (Page 24)

User Guide for the VP530 IP Video Phone
12
2. Connect the supplied Ethernet cable between the Internet port on the phone and
the Internet port in your network or the switch/hub device port.
Power over Ethernet
Using a regular Ethernet cable, the VP530 IP video phone can be powered from a PoE
(IEEE 802.3af) compliant switch or hub.
To connect the PoE:
1. Connect the Ethernet cable between the Internet port on the phone and an
available port on the in-line power switch/hub.
Note If in-line power is provided, you don’t need to connect the AC adapter. Make sure the
Ethernet cable and switch/hub is PoE compliant.
The phone can also share the network with other network device such as a PC (personal
computer). It is an optional connection.
Important! Do not unplug or remove the power to the phone while it is updating firmware
and configurations.