Phone initialization, Phone status – Yealink VP530 User Manual
Page 25
Getting Started
13
After your phone has been powered up, the system boots up and performs the
following steps:
Automatic Phone Initialization
The phone finishes the initialization process by loading the saved configuration. The
phone LCD screen will display as following:
DHCP (Dynamic Host Configuration Protocol)
The phone attempts to contact a DHCP server in your network to obtain its valid network
settings (e.g., IP address, subnet mask, gateway and DNS server) by default.
Note
You can view the system status of your phone via phone user interface or web user
interface.
Available information of phone status includes:
General status (e.g., IP address, MAC address and firmware version)
Network status (e.g., WAN type, WAN IP and subnet mask)
Phone status (e.g., hardware version, firmware version, product ID and MAC
address)
Accounts status (e.g., the register status of SIP accounts)
To view the phone status via phone user interface:
1. Press , or tap ->Status.