Bio-Rad TC20™ Automated Cell Counter User Manual
Page 26
21
Saved Count Results
2. Use the down key to select Export previous counts, and press Enter. If the
USB flash drive is already inserted into instrument, the export starts automatically.
Otherwise, “Insert USB flash drive into Port A to export counts. Press Enter to return”
is displayed on the screen.
3. To proceed with the export, insert the USB flash drive into USB port A. The export
starts automatically. Alternatively, cancel the data export by pressing Enter.
4. Once the previous counts have been exported, “File saved as RSLT…..TXT. Press
Enter to return” is displayed.
5. To exit, press Enter.
To export image from the most recent count:
1. From the Home screen, use the down arrow key to select Export data and press
Enter.
2. Use the down key to select Export current image, and press Enter. If the USB flash
drive is already inserted into instrument, the export starts automatically. Otherwise,
“Insert USB flash drive into Port A to export current image. Press Enter to return” is
displayed on the screen.
3. To proceed with the export, insert the USB flash drive into USB port A. The export
starts automatically. Alternatively, cancel the data export by pressing Enter.
4. Once the previous counts have been exported, “File saved as CELLxxxx.JPG. Press
Enter to return” is displayed.
5. To exit, press Enter.
Important: At each new cell count the image from previous count is replaced by the
image from the most recent count. When the instrument is switched off, the image
from the last count is no longer kept in memory.
Automatic Data Export
If the Data autosave is enabled (see Setting Up Automatic Data Export and Sample
Naming for details) the image (containing metatag with count data) from the current
count will automatically be exported to a USB flash drive inserted into USB port A on
the cell counter. The image can be viewed on your computer in JPEG format and further
analyzed with the TC20 data analyzer.
To automatically export image from current count:
1. Insert a counting slide into the slide slot of the TC20 cell counter to initiate a cell count.
2. If the USB drive is inserted, the image from that count will automatically be exported
to the flash drive. If the USB flash drive is not inserted, “Insert USB flash drive into port A,
Press Home to cancel” is displayed.
3. At that point either insert the flash drive or press Home to cancel the export. You can
export the image after the count using the Export data option from the Home screen.