3 vortex station – Bio-Rad Experion DNA Analysis Kits User Manual

Page 22

Text mode
Original mode

Technical Support: 1-800-4BIORAD • 1-800-424-6723 • www.bio-rad.com

Fig . 3 .4 . Pulling the priming seal tab.

3.3 Vortex Station

To clean the vortex station, unplug it from its power source and clean carefully with a damp cloth
and water. Do not clean with acetone or other organic liquids, except alcohol. In extreme cases, mild
alcohols (10% ethanol, for example) may be used. Dry thoroughly.

Experion Automated Electrophoresis System

This manual is related to the following products:

Experion RNA Analysis Kits Experion Protein Analysis Kits Experion RNA StdSens Starter Kit Experion Pro260 Starter Kit Experion Software Experion™ Vortex Station II Experion Priming Station Experion™ Automated Electrophoresis Station