Bio-Rad C1000 Touch™ Thermal Cycler - Manual (Page 6)

C1000 Touch TM Thermal Cycler Manual
v
• IEC 61010-1:2001 Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use, Part 1: General Requirements
• IEC 61010-2-010:2003 Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory use, Part 2-010: Particular Requirements
for Laboratory Equipment for the Heating of Materials
• IEC 61010-2-081:2001+A1:2003 Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory use, Part 2-081: Particular Requirements
for automatic and semi-automatic laboratory equipment for analysis and other
purposes
• CAN/CSA-C22.2 NO. 61010-1-04 Safety Requirements for Electrical Equipment
for Measurement, Control, and Laboratory Use, Part 1: General Requirements
• CAN/CSA-C22.2 NO. 61010-2-010-04 Safety Requirements for Electrical
Equipment for Measurement, Control, and Laboratory use, Part 2-010: Particular
Requirements for Laboratory Equipment for the Heating of Materials
• CAN/CSA-C22.2 NO. 61010-2-081-04 Safety Requirements for Electrical
Equipment for Measurement, Control, and Laboratory use, Part 2-081: Particular
Requirements for automatic and semi-automatic laboratory equipment for
analysis and other purposes
• EN 61010-1:2001 Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use, Part 1: General Requirements
• EN 61010-2-010:2003 Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory use, Part 2-010: Particular Requirements
for Laboratory Equipment for the Heating of Materials
• EN 61010-2-081:2002+A1:2003 Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory use, Part 2-081: Particular Requirements
for automatic and semi-automatic laboratory equipment for analysis and other
purposes
• UL 61010-1:2004(R2008) Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use, Part 1: General Requirements
E LECTROMAGNETIC C OMPATIBILITY (EMC)
• IEC61326-1:2005 Electrical Equipment for measurement, control, and laboratory use
- EMC Requirements, Class A
• EN61326-1:2006 Electrical Equipment for measurement, control, and laboratory use
- EMC Requirements, Class A
• FCC Part 15, Subpart B, Sections 15.107 and 15.109 as a Class A digital device
FCC W ARNINGS AND N OTES
• Warning. Changes or modifications to this unit, not expressly approved by Bio-Rad
Laboratories, could void the user’s authority to operate the equipment
• Note. This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference, at his own expense
• Note regarding FCC compliance. Although this instrument has been tested and found
to comply with Part 15, Subpart B of the FCC Rules for a Class A digital device, please
note that this compliance is voluntary, for the instrument qualifies as an “exempted