Bio-Rad C1000 Touch™ Thermal Cycler - Manual (Page 20)

C1000 Touch TM Thermal Cycler Manual
11
2 Creating, Editing, Naming, and
Saving Protocols
Read this chapter for information on creating and editing protocols.
• Creating a new protocol or editing an existing protocol (page 11)
• Sample volume and lid temperature (page 17)
• Naming a protocol (page 19)
• Saving a protocol (page 19)
Creating a New Protocol or Editing an Existing Protocol
To create a new protocol:
1. Touch the New Protocol button on the home screen to open the new protocol screen.
A template protocol opens (Figure 12).
Figure 12. The template protocol.