Great Plains P17921E Operator Manual - Manual (Page 31)

31 UniPress
Operating Instructions
5. Servicing and Maintenance
5.8 Operator Support
If you have a problem, please contact your
dealer. They will endeavour to solve any
problems which may occur and provide you
with support at all times.
In order to enable your dealer to deal with
problems as quickly as possible, it helps if
you can provide them with the following data.
Always state the:
• Customer Number
• Name and Address
• Machine Model
• Serial Number of Machine
• Date of Purchase and Operating Hours
• Type of Problem
5.7 Preparation for
Storage
If you need to store the machine for a longer
period, observe the following points:
• Park the machine undercover if possible.
• Protect the roll against rust. If you need
to spray the implements with oil, use light
biologically degradable oils, e.g. rape oil.
Cover any rubber sections before
using oil sprays. These sections
must not be oiled. Remove
any traces of oil with a suitable
cleaning agent.
5.5 Tines
When performing maintenance
work on tines extreme care
should be taken. Wear goggles
and gloves at at all times when
maintaining tines.
Safely support unfolded machine
in raised position using taps
and stands before attempting
maintenance work on tines.
Do not attempt to assist fitting tine
points with a steel headed hammer,
this can lead to splintering of the
metal due to its hardness, which
can cause injury. If tine fitting
requires assistance, a copper/
hide or plastic mallet should be
used.
Fig. 5.01: Knock-on Tine Point Removal Tool

STRIKE WITH
MALLET
ENGAGE POINT
REMOVAL TOOL
5.6 Levelling Boards
Safely support the unfolded
machine in a raised position using
taps and stands before attempting
maintenance work on the levelling
boards.