Great Plains 800EW Operator Manual - Manual (Page 21)

Install Hardware 19
02/24/2010 175-253M
Install Small Seeds Delivery
If the drill did not previously have a Small Seeds box
installed, continue at “Re-Install Ladder” on page 24.
Install Side Delivery Tubes
Start with the left-most row unit.
Refer to Figure 26 (fertilizer delivery tube not depicted)
70. For each row, select one each new:
133-128H SGS SIDE DELIVERY TUBE
802-427C HFS 3/8-16X3 3/4 SPTHD
803-209C NUT FLANGE LOCK 3/8-16 PLT
71. Orient the side tube weldment with the delivery
tube to the left of the row unit, and the mount ahead
of the fertilizer delivery tube hole
.
72. Insert a bolt through mount and the row unit
frame at hole . Secure with lock nut .
73. Repeat step 70 through step 72 for each row unit.
Install Seed Hoses
Start with the left-most row unit (row 1).
74. At rows 1 and 2, route the hose through clips of
the SGS final drive as shown in Figure 8 on page 9.
Refer to Figure 27
75. Select one new:
816-513C SGS HOSE 85 RIBS
and two new:
800-321C HOSE CLAMP NO.12 3/4 ID
76. Open a hose clamp and place it over an end of
the hose . Move the clamp down to the start of
the ribbed section.
77. Slide the top of the hose onto the meter drop
tube of the fluted feed cup for that row, so that the
hose completely covers the straight portion of the
exit tube. Open the clamp and position it about
1 ⁄
4
in
(6mm) above the bottom of the exit tube.
At rows 1 and 2, tighten hose clips (see Figure 8
on page 9).
78. Open a hose clamp and place it over the other
end of the hose . Move the clamp up from the
end of the hose.
79. Slide the bottom end of the hose onto the top of
the delivery tube , so that it completely covers the
exposed portion of the tube. Open the clamp and
position it about
1 ⁄
2
in (13mm) from the end of the
hose.
80. Repeat step 75 through step 79 for each row unit.
U
D
F
B
L
R
Figure 26:
Small Seeds Side Delivery Tube
with Fertilizer
27450
185
4
197
108
3
108
185
197
108
3
185
4 197
23
U
D
B
F
R
L
Figure 27:
Small Seeds Drop Tubes
29576
224
6
166
166
5
Note: Feeder cups may not be directly above the row unit
to which their hose connects.
224
166
166
224
224
5
23
166
224
224
6