Great Plains TSF660 Operator Manual - Manual (Page 48)

TSF660
500-644M 9/1/2009
46
13854
Lubrication Point
Swing arm weldment top and bottom, both sides
of the center section, four zerks total
Type of Lubrication: Grease
Quantity = Until resistance is felt
10
Lubrication Point
Top and bottom of inner pivot tube weldment, both
ends of the center section, four zerks total
Type of Lubrication: Grease
Quantity = Until resistance is felt
30
50 Multipurpose
spray lube Multipurpose
grease lube
Multipurpose
oil lube Intervals at which
lubrication is required
Lubrication
Two Wheel Bearings
Repack and check the seals every 500 hours of
use.
Type of Lubrication: Wheel bearing grease.
Seasonally
20417
20418