Operating checklist – Great Plains TSF660 Operator Manual User Manual
Page 26

TSF660
500-644M
9/1/2009
24
21. Take note of adjoining crops, houses, gar-
dens, people, etc.
22. When you are finished spraying, empty the
tank and flush the sprayer with water, includ-
ing the pump, the nozzles and the bypass line
from the throttling valves. Properly store the
chemical emptied from the tank or dispose of
it by the recommendations on its label.
23. When turning at the end of a field, make sure
you are correct on the rows so that the boom
will not overlap on crop previously sprayed.
Operating Checklist
Each time the sprayer is used, check the following:
Check tire pressure, wear and overall condition.
Check the tractor’s brakes to make sure they operate
properly.
Make sure all lights and turn signals are working prop-
erly.
Lubricate sprayer as needed.
Booms must be locked in place before transporting.
Inspect tank. Make sure the hitch is adjusted so that
the solution drains to the sump.
Use safety equipment as listed on page 5.
Fill with water and calibrate sprayer BEFORE adding
chemical to the tank.
Check the position of the ball valves in the plumbing to
see if they are in the correct position.
Check hoses, pumps and valves for any leaks.
Check nozzle pattern for streaks and non-uniformity.
Check the sprayer initially and periodically for loose
bolts and pins.
Follow “Important Safety Information” on page 4 of
this Manual.
Make sure the handwash tank is full of clean water.