Safety decals, Safety reflectors and decals, 003c slow moving vehicle reflector – Great Plains SML1000 Operator Manual User Manual
Page 9: 266c red reflectors
Great Plains Manufacturing, Inc.
Important Safety Information
5
03/31/2011
407-451M
Safety Decals
Safety Reflectors and Decals
Your implement comes equipped with all safety reflectors
and decals in place. They were designed to help you
safely operate your implement.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request cor-
responding safety decals.
To install new decals:
1.
Clean the area on which the decal is to be placed.
2.
Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
818-003C
Slow Moving Vehicle Reflector
On the back of the tank;
1 total
Null4:
838-266C
Red Reflectors
On rear face of axle (below Daytime reflectors);
two total
Null4:
Null4:
31499
Null4:
31499