Great Plains SML1000 Operator Manual - Manual (Page 41)

Great Plains Manufacturing, Inc. Table of Contents Index Appendix B - Pre-Delivery 37
03/31/2011 Table of Contents Index 407-451M
Adjust Stabilizers
Refer to Figure 22
14. Loosen jam nut
and back out set screw .
15. Drive screw in (down) until it contacts spring
plate .
16. Drive screw in another 1 inch (2.5cm).
17. Tighten jam nut.
18. Repeat step 9 through step 17 for the other caster.
Caster Closeout
19. Apply grease to the zerk at the end of each axle
weldment. Pump until grease emerges.
20. Lower the rear of the cart to the ground.
21. Adjust parking stand cranks to level cart.
Pre-delivery is complete.
Null4:
Figure 22
Adjust Stabilizer
31483
39
27
16
2
39 27
16
2