Compatible materials, Serial number plates, Compatible materials serial number plates – Great Plains SML1000 Operator Manual User Manual
Page 12
8
SML-1000, SML-750, SML-500
Great Plains Manufacturing, Inc.
407-451M
03/31/2011
Compatible Materials
Carts are intended for pre-mixed liquid fertilizers
• Use stable mixtures. The carts do not include agitators
to prevent rapid settling, stratification, coagulation or
precipitation of components not fully dissolved or sus-
pended in the base liquid.
• The specific gravity (density relative to water) of the
mixture must be 1.7 or lower.
• If the mixture contains any particulates, the largest
must be no larger than the smallest of:
screen size of the cart inlet filter,
screen size of the pump strainer and the
orifice size of the boom nozzle plates.
• All materials must be compatible with: high density
polyethylene (HDPE), nylon, polypropylene (PP)
polyvinyl chloride (PVC) and Teflon
®
(PTFE) plastics,
EPDM and Viton
®
rubber, stainless steel; and tempo-
rary contact with cast iron.
Null4:
Serial Number Plates
The serial number plate is located on the side face of the
left front frame tank support plate.
Note: The SML-1000, SML-750 and SML-500 were for-
merly sold as the 407-451A, 407-452A and 407-
643A and did not have serial number plates.
Null4:
Null4:
Null4:
Note: The 500, 750 and 1000 gallon carts are not sup-
ported with 30-foot (9m) implement models
AD3010HD, YP3010HDP, YP3020P or YP3025/A.
Compatible
Implement Models
Cart Models
AD4010HD
No
Yes
Yes
YP2425, YP2425A
Yes
Yes
Yes
YP4010HDP
No
Yes
Yes
YP4020P
No
Yes
Yes
YP4025, YP4025A
No
Yes
Yes
Null4:
Figure 4
Serial Number Plate
31487