System requirements, Using this guide – Dymo LabelWriter Print Server User Manual
Page 6
About the LabelWriter Print Server
2
System Requirements
The print server requires a standard Ethernet connection and one of the following:
•
Windows
®
XP 32-bit
•
Windows Vista
®
32 or 64-bit
•
Windows
®
7
•
Mac OS
®
X v10
.4 or later (LabelWriter Duo requires Mac OS X v10.5 or later)
•
Linux (Linux is not officially supported. See "Adding a Printer in Linux" on page 16 for
more information)
Using this Guide
This User Guide provides instructions for the DYMO LabelWriter print server on the Windows,
Macintosh, and Linux platforms. For the most part, the software operates in the same way on all
platforms. Any differences in features, procedures, or commands are noted within the text.
This User Guide includes information for installing and using the print server with a DYMO
LabelWriter printer. Depending on the model of DYMO printer you are using, some sections of this
User Guide may not apply to you. The following table provides a summary of the contents.
User Guide Chapter
Description
This chapter gives an overview of the print server.
This chapter describes how to install and configure the print server, install
the Print Server Control Center software, and add a LabelWriter printer to
your computer.
This chapter includes information about the Print Server Control Center
software. This includes information on changing the server configuration and
upgrading the firmware.
This chapter offers suggestions for resolving problems that can occur when
using the print server. If you are unable to solve a problem, this chapter also
describes how to contact DYMO Technical Support.
This chapter contains technical and certification information for the print server.