Dymo LabelWriter Print Server - Manual (Page 5)

1
Chapter 1
About the LabelWriter Print Server
Congratulations on purchasing a DYMO LabelWriter print server. Your print server will give you
years of reliable service. We encourage you to take a few minutes to review how to use and care for
your print server.
Using the print server, you can connect your LabelWriter 400 or later series printer directly to your
network, without dedicating a computer to printer sharing. Now everyone connected to your
network can print to a single LabelWriter printer. We have no doubt that the LabelWriter print
server will make your job easier and more efficient.
Print Server Features
Your LabelWriter print server can be used to share any LabelWriter 400 or later series printer,
including the LabelWriter Twin Turbo and LabelWriter Duo.
The print server connects to your network using a standard Ethernet connection.
Become familiar with the major components of the print server.
The status lights visually show the current state of the print server. See "Status Lights" on page 25
for a description of the status lights.
POWER LINK ACTIVE USB
DC-IN
Init.
USB
LAN
Ethernet
connector
(to network)
USB
connector
(to printer)
Init/Reset
button Power
connector
Status lights