Dymo LabelWriter Print Server - Manual (Page 12)

Adding a Printer
8
5 On the Select a Printer Port page,
do the following:
a. Select Create a new port.
b. Choose Standard TCP/IP
Port from the Type of
port list.
c. Click Next.
The Add Standard TCP/IP Printer
Port Wizard starts.
6 Click Next.
7 On the Add Port page, do
the following:
a. In the Printer Name or IP
Address field, enter the IP
address that you wrote down
when configuring the
print server.
The port name is filled in
automatically.
b. (Optional) Enter a new name
for the port in the Port
Name field.
When adding a LabelWriter
Duo printer, you must give the
Label printer port and the Tape
printer port different names.
c. Click Next.
8 On the Additional Port
Information Required page, select
Custom, and then click Settings.