Dymo LabelWriter Print Server - Manual (Page 17)

Adding a Printer in Windows Vista
13
11 On the Type a printer name
page, do the following:
a. Enter a name for your
printer in the Printer
name field.
b. Select whether or not you
want to use this printer as
the default printer.
c. Click Next.
12 To print a test label, click
Print a test page.
13 Click Finish.
The printer is now available in
the printer list. For the
LabelWriter Duo, you now need to add the tape portion of the printer.
To add the Tape printer portion of the LabelWriter Duo printer
1 Repeat steps 1-7 in "To add a LabelWriter
printer" on page 11.
2 In the Configure Standard TCP/IP Port
Monitor dialog box, do the following:
a. Under Protocol, select Raw.
b. Under Raw Settings, enter 9102 in the
Port Number field.
c. Click OK.
3 On the Additional Port Information
Required page, click Next.
4 On the Install the printer
driver page, do the following:
a. Choose DYMO from the
Manufacturer list.
b. Choose DYMO
LabelWriter Duo Tape
from the Printers list.
c. Click Next.