Dymo LabelWriter Print Server - Manual (Page 25)

Configuring the Server
21
Configuring the Server
From the Print Server Configuration page, you can change the server name and description,
configure the IP address, change the administrator name and password, and perform maintenance
on the print server.
To access the print server Configuration page
1 Click Config at the top of the Print Server home page.
2 Enter the following in the Administrator and Password fields, and then click Login.
Administrator: admin
Password: admin
Note These are the default settings. See "Changing the Administrator Name and Password"
on page 22 for information on how to change the administrator name and password.
Changing the Server Name and Description
You can change the name and description of the print server. If you have more that one print server
connected to your network, giving each server a distinct name or description makes it easy to
distinguish between servers.
To change the server name and description
1 Click General Configuration on the left side of the Configuration page.
2 Enter a new name for the server in the Server Name field.
3 Enter a new description for the server in the Server Description field.
4 Click Submit.
The print server name and description are updated.