ClearOne Beamforming Microphone Array Installation Guide - Manual (Page 7)

Chapter 2: Ceiling Mount Installation 4
Chapter 2: Ceiling Mount Installation
Once you have verified all the firmware updates and necessary connections made while executing
the tasks outlined in the Beamforming Microphone Array Quick-Start Guide, you can proceed to the
actual installation of the Beamforming Microphone Array using the Ceiling Mounting Kit.
PARTS RECEIVED
The following parts are delivered with the Ceiling Mounting Kit and will be used for installation of the
Beamforming Microphone Array.
The parts received include parts for mounting in either a solid or drop-ceiling. Verify that you have
all the parts required to complete your installation.
When you open the shipping package(s) for the first time, please check that all items purchased
are included. If any of the items (according to your customer order) are missing or damaged,
contact your ClearOne distributor immediately.
HE
QTY 4
HD
QTY 2
HA
QTY 8
HB
QTY 2
HC
QTY 2
E
QTY 2
Position Clamp
D
QTY 1
Mic Mounting Plate
A
QTY 1
Ceiling Mounting Plate
B
QTY 1
Suspension Column
F
QTY 2
Support Rails
G
QTY 2
Locking Plate
C
QTY 1
Trim Plate
Requires #1
Phillips Screwdriver Bit
Requires #1
Phillips Screwdriver Bit