ClearOne Beamforming Microphone Array Installation Guide User Manual
Page 13
Chapter 2: Ceiling Mount Installation 10
Pass the E-bus cables for LINK IN and LINK OUT (if needed), and the PoE cable from above the
ceiling through the pass-through hole down the Suspension Column and out of the assembly.
E-bus Cables for
LINK IN and LINK OUT
Connections
PoE Cable
PoE Cable
E-bus Cables for
LINK IN and LINK OUT
Connections
Cables Can Be Attached to
Ceiling Plate Corner Holes for
Earthquake Safety
(Ceiling tile and front
tile supports are not
shown for clarity.)
» NOTE: Safety cables (not provided) can be secured to the building structure then
be attached to the corner holes of the Ceiling Plate to prevent the Beamforming
Microphone Array from falling in the event of an earthquake or other accident.