Usage, Muting, Usage muting – ClearOne Beamforming Microphone Array Installation Guide User Manual
Page 27
Chapter 4: Table Top Installation 24
u
sage
When the table top installation of the Beamforming Microphone Array is completed, use the
CONVERGE Console software to configure the array for the proper pickup pattern.
m
uting
On the tabletop, the Mute On/Off buttons are readily available for use when conferencing. When
the microphone array is active, the microphone icons in the buttons illuminate blue. If either button
is pressed, the Beamforming Microphone Array mutes and the buttons illuminate red. If pressed
again, the array um-mutes and is active again.