SARGENT AL - Alarmed Exit - Manual (Page 3)

Sample Wiring #1 – TL- Prefix SARGuide and 3532 Power Supply
and Battery Back-up
System Description:
SARGuide is always powered. During a
power outage SARGuide remains powered
and illuminated by 3532 battery back-up
power.
Notes:
1. TL- SARGuide power requirement:
Input Power: 24VDC/VAC
Current draw: 30mA
2. Pigtail harness, raceway and electric hinge
8-pin connector terminations and wire
colors all match.
3. 4 to 8-pin patch cable converts TL- 4-pin
connector pins 1 & 2 to 8-pin connector
pins 1 & 2.
4. Wire to pigtail harness assembly as shown
then plug pigtail connector into hinge
connector.
3
F. TL- SARGuide Wiring Examples
Plug pigtail harness
connector into
8-pin hinge connector
at frame side
of door
Electric Hinge with
8-pin connectors
Pigtail harness
assembly with
8-pin connector
1 7 5
6 4
3
2 8
TL- Sarguide
80 Series Rail
with 4-pin connector
8 to 8-pin
patch cable
2, Red (+24)
1, Black (-24)
120 VAC
L/N/G
L N
Input
120VAC 60HZ
+ - + -
Output
1
Output
2
1 2 3 4 5 6 7 8 9
TB1
TB2
TB3
+
-
Battery Battery
3532
24VDC, 2Amp
Power Supply
w/Battery Backup
GND
24VDC
Raceway harness with
8 pin connector.
Copyright © 2009, SARGENT Manufacturing. All rights reserved.
Reproduction in whole or in part without the express written
permission of SARGENT Manufacturing is prohibited.
A7711C - 5-1-9