SARGENT 4292 Keypads - Manual (Page 6)

6 1-800-810-WIRE • www.sargentlock.com • A6851J
Copyright © 2011, Sargent Manufacturing Company
, an ASSA ABLOY Group company
. All rights reser
ved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
02/10/11
4291 and 4292 Keypads
5 Programming
The keypads come pre-programmed with the master code 1234*.
The master code is used to program your fifteen (02-16) user codes and functions.
If you are unsure of where you are in programming, press the * key several times until the yellow LED is off and
start again at the beginning. Also, if no key is pressed for 30 seconds, the programming mode in process is
automatically aborted.
1. Enter 99# to initiate programming sequence.
2. Enter Master Code*.
This code can be changed, refer to C. Changing the Master Code .
3. Enter two digit time duration desired.
Enter 01 to 90 seconds for Momentary Function. Enter 00 for Maintained Function.
4. Enter two digit user number.
Enter 02# to 16#.
5. Enter Selected User Code.
Use between a one and six digit number followed by a *.
6. Repeat step 5.
A. Program Users Codes 2 Through 16
Sample Programming:
B. Delete User Codes 2 through 6
1. Enter 99# to initiate deleting sequence.
2. Enter Master Code*.
This code can be changed, refer to C. Changing the Master Code .
3. Enter two digit user number desired to be deleted.
Enter 02# to 16#.
4. Enter ** to complete deletion.