Tweco Cigweld WeldSkill Auto Darkening Welding Helmets - Manual (Page 14)

WeldSkill Auto-Darkening Welding Helmets
February 29, 2012 13
SECTION 7: Installation of Magnification Lens (Optional)
CIGWELD magnification lenses magnify the work area substantially to assist the welder in maintaining the high standard required.
WARNING
Before installing the magnification lens, ensure that the rear cover lens is in place.
Magnification lens ordering information (optional):
Description Part Number
1.50 diopter 454012
2.00 diopter 454010
2.25 diopter 454014
2.50 diopter 454011
1. Magnification Lens Frame
Magnification lens frame shown on left without magnification
lens installed.
2. Installing Magnification Lens
To install magnification lens, slide the magnification lens from
the top of the magnification lens frame and slide it down until
it comes in contact with the last set of tabs on the
magnification lens frame. Ensure that the lens fits firmly in
between the tabs.
3. Magnification Lens installed
Once the lens is installed it should sit firmly in place as shown
in the picture on the left.
4. Removing Magnification Lens
To remove the magnification lens slide the magnification
lens from the bottom edge in an upwards motion until the
magnification lens becomes free from the magnification
lens frame.