Tweco A40-A60 CutMaster - Manual (Page 75)

CUTMASTER A40, A60
Manual 0-5120 PARTS LIST 6-1
SECTION 6:
PARTS LISTS
6.01 Introduction
A. Parts List Breakdown
The parts list provide a breakdown of all replaceable components. The parts lists are arranged as follows:
Section 6.03 Complete Power Supply Replacement
Section 6.04 Replacement Parts
Section 6.05 Options and Accessories
Section 6.06 Torch Replacement Parts for SL100with SV
Section 6.07 Torch Consumables Parts for SL100
Section 6.08 Torch Consumables Parts for SL60
Section 6.09 Replacement Parts For Hand Torch
NOTE
Parts listed without item numbers are not shown, but may be ordered by the catalog number shown.
B. Returns
If a product must be returned for service, contact your distributor. Materials returned without proper autho-
rization will not be accepted.
6.02 Ordering Information
Order replacement parts by catalog number and complete description of the part or assembly, as listed in the
parts list for each type item. Also include the model and serial number of the power supply. Address all inqui-
ries to your authorized distributor.
6.03 Power Supply Replacement
The following items are included with the replacement power supply: work cable & clamp, input power cable,
gas pressure regulator / filter, and operating manual.
Qty Description Catalog #
1 CMA40 400/415VAC Non CE, Three - Phase, 50 Hz, with input power cable 3-5134-3
1 CMA40 400/415VAC CE, Three - Phase, 50 Hz, with input power cable 3-5134-4
1 CMA60 400/415VAC Non CE, Three - Phase, 50Hz, with input power cable 3-1134-3
1 CMA60 400/415VAC CE, Three - Phase, 50Hz, with input power cable 3-1134-4