Tekmarnet, Menu – tekmar 654 Snow Melting Control Installation User Manual

Page 24

2013 654_D

06/13

Item Field

Range

Access

Description

Set to

Range: AUTO,

01 to 24,

b:01 to b:24,
1:01 to 1:24,
2:01 to 2:24,

3:01 to 3:24

Installer

ADDRESS

The tekmarNet

address of this control. To manually set

the address, use the up or down arrow buttons.

1 to 24

Installer

DEVICE COUNT

Provides a count of all the tekmarNet

thermostats,

setpoint controls and snow melting controls on the

tekmarNet

system.

1 to 12

Default = 1

Installer

SNOW ZONE

Select the Snow Zone that this control operates. Snow

Zone 1 has the highest priority while Snow Zone 12 has

the lowest priority.

OFF or ON

Default = OFF

Installer

TRACK ZONE

Select to track and record the running hours of Snow Zone

1 and repeats this run time on this control. This allows

snow zones without a snow / ice sensor to automatically

start.
Conditions: Snow Zone must be set 2 through 12 (cannot

be Snow Zone 1) and Application Mode is set to PWM,

Boil, Mix or Elec.

1 to 12

Default = 1

Installer

MELT GROUP

A User Switch may be used to manually start melting

the snow zone. Set the Melt Group number to the

corresponding Setpoint Enable number on the User

Switch.
Conditions: Application Mode is set to PWM, Boil, Mix

or Elec.

1 to 12

Default = 12

Installer

STORM GROUP

A User Switch may be used to manually start storm

operation of the snow zone. Set the Melt Group number

to the corresponding Setpoint Enable number on the

User Switch.
Conditions: Application Mode is set to PWM, Boil, Mix

or Elec.

OFF, COND,

FULL

Default = OFF

Installer

PRIORITY

Select the priority operation of the snow melting system.
Conditions: Application Mode is PWM, Mix or Elec.

OFF or ON

Default = OFF

Installer

LOCAL NETWORK GROUP
Select if scenes and time clock are shared when
connected to a tekmarNet

system.

OFF = Send and receive messages.
ON = Receive messages only.

Conditions: Application Mode is set to PWM, Boil, Mix

or Elec.

tekmarNet

The tekmarNet

menu includes settings of how the snow melting control communicates and operates together with other controls.

The tekmarNet

menu is only available when communication is detected.