tekmar 654 Snow Melting Control Installation - Manual

Snow Melting Control 654
654_D
06/13
Snow Melting Replaces: New
Installation & Operation Manual
1 of 44 © 2013 654_D - 06/13
Features
Automatic Snow / Ice Detection
Supports Both Inslab & Retrofit Aerial Sensors
Manual Start With Timer
Programmable Schedule
tekmarNet
® Communication Compatible
Warm Weather Shut Down
Cold Weather Cut Out
Idling
Snow Melt Zoning With Priority
Tandem Snow / Ice Detection
Slab Protection
Storm
EconoMelt
Manual Override
Snow Melt Zone Tracking
Scenes
Away Key
Exercising
Alert Output
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Introduction
The Snow Melting Control 654 is designed to operate electric or hydronic equipment to melt snow or ice from any surface
including driveways, walkways, patios, business entrances, parking ramps, loading docks, hospital entrances, helipads
or car wash bays. The surface temperature for snow melting is controlled automatically to reduce operating energy costs.
The 654 has an automatic start and stop function when used with the Snow/Ice Sensor 090 or 094. Automatic start with a
timed stop is available when used with the Snow Sensor 095. The 654 can operate a dedicated hydronic boiler or a mixing
device. Isolation relays are required to operate line voltage pumps. Electric systems require a separate GFCI and electrical
relay contactor.