Sindoh A611dn - Manual (Page 49)

Using the Printer
3-
5
6 [Reset All Settings/Values] will appear on the LCD.
7 Press 【▶】 to go to [Yes]. Then press [OK].
[Factory Settings being Restored] will appear and [Ready] will be displayed.
Note that all settings will be restored to factory setting.
Printing System Report Page
The system report page shows the current setting (the user-defined setting) such as the menu, currently
installed option, usable printer memory, etc. You can check the printer setting through this page. Should
you need assistance regarding the LCD display window and buttons, see
「 Using the Control Panel」 p. 3-2 .
1 Check whether or not the printer is turned on.
2 Press 【MENU】 to enter [Menu].
3 Press 【▼】 to go to [Report].
Then press 【OK】.
4 Check whether [System Report] has been selected.
Then press [OK].
[System Report Printing] appears while the report is being printed.
When the report is printed, the printer is switched to [Ready].
If another message is displayed while the page is being printed,
refer to
「 Understanding Printer Messages」 p. 3-14 .