Sindoh A611dn - Manual (Page 48)

Using the Printer
3-
4
2. Understanding the Printer Settings Menu
Changing printer settings with Printer Settings Menu
1 Press 【Menu】 when in [Ready] mode. [Menu] will appear.
2 Operate 【▼】, 【▲】 buttons until the desired menu is displayed.
3 Press 【OK】 button to select the [Menu] or [Menu item] displayed in the second line of the LCD
display window of the control panel.
A. Select [Menu] to open and show the first setting.
B. Select [Menu item] to show its default value. Each menu item has a list of values.
They consist of words, phrases, and numbers or On/Off.
4 Press 【OK】 button to select the value on the second line of the LCD.
A new value is saved when you press 【OK】 button. Press 【 】 button to go to the previous menu.
User defined settings are used until new settings are saved or settings are reset to factory settings.
Change settings to your environments.
Restoring to Factory Setting
To reset the current settings to the factory default settings, select the factory setting menu from the general
setting menu, and follow the steps described below.
Follow the following instructions to restore to the initial factory setting:
1 Check whether the printer is turned on.
2 Press 【MENU】 to enter [Menu].
3 Check if [Settings] has been selected.
Then press 【OK】.
4 Press 【▼】 to find [General Menu Settings].
Then press 【OK】.
5 Press 【▼】 to find [Factory Reset].
Then press [OK].