Sindoh A611dn - Manual (Page 14)

6
Before Use
Power Consumption
Product Power Consumption
The table below shows power consumption of the printer. Some modes may not be included in your product.
Mode Description Power Consumption (W)
Printing Creating paper document from
electronic input data. 750W
Ready Ready for printing 110W
Power Save Mode In Energy Saving Mode Under 6W
OFF Plugged into outlet but power has been
switched off Under 0.05W
Power consumptions above are average measurements taken by the hour.
Instant power consumption may be significantly higher than average.
Power Save Mode
This product is designed to provide energy saver mode named Power Save Mode.
The Power Save Mode reduces power consumption when the printer is not used so as to save energy.
If this product is not used for a certain period of time, it automatically enters Power Save Mode.
Time before entering the Power Save Mode is set to default factory setting. With this menu,
you can change the time before entering Power Save Mode to between 1 and 240 minutes.
Setting the time short will save more energy but decrease the product’s response time.
Setting the time long will help maintain shorter response time but use more energy.
Deactivate Mode
Products with Deactivate mode may still consume small amount of power.
To completely stop power consumption, unplug the power cord from the outlet.
Total Energy Consumption
Calculating the total energy consumption of the product may be useful.
Because electricity bills are charged by watt, you must multiply the time the product spent in each mode
by the power consumption.
Total energy consumption is the sum of energy consumption in each mode.
Wireless LAN Standard
This mobile device may cause airwave interference. and as such cannot be used for emergency calls.