Photoflex, Warranty – Photoflex FV-BSL3200 StarLite QL User Manual
Page 2
![background image](/manuals/592884/2/background.png)
photoflex
lightingschool
.com®
For warranty registration and information, please visit www.photoflex.com®
Customer Support (800) 486-2674
email: [email protected]
Corporate Office (831) 786-1370 • FAX (831) 786-1371
97 Hangar Way, Watsonville, CA 95076
PHOTOFLEX
®
WARRANTY
• Warranties only cover manufacturer’s defects and workmanship
• We reserve the right to inspect all merchandise returned (end users and
dealers) for warranty fulfillment.
• All returns must be accompanied by a receipt showing date of purchase.
• Freight must be paid by the customer or dealer.
• Warranties are valid only from date of Original Purchase.
• Warranty does not cover normal wear and tear.
Step 4 – Installing lamp and power cable
a. Insert StarLite
®
QL lamp into the porcelain socket and turn
clockwise until secure.
Note: Do not over tighten as you may damage the lamp.
b. Plug the PC connector on one end of the Cable into the
AC-Inlet on the rear of the StarLite
®
head.
c. The power cable has a heavy duty 20 amp inline rocker switch.
Make sure that the switch is in the off position before plugging
it into the live power.
Step 5 – Breaking down the StarLite
®
QL & SoftBox assembly
To disassemble the completed StarLite
®
QL and SoftBox assembly
perform the previous steps 1-4 in reverse.
Note: To detach the StarLite
®
head from the SoftBox connector pull
back on the spring loaded lever to release the locking pin and
simultaneously turn the StarLite
®
head counter clockwise to
release.
Step 4 Figure b
Step 4 Figure a
Step 4 Figure c
Step 5 Figure a
To release