Photoflex DP-FSPDKT FirstStudio Product Kit - Manual (Page 2)

PROFESSIONAL PHOTOGEAR
Visit photoflex lightingschool .com® for the best free learning resource! For detailed specifications, product tutorial videos and more, please visit www.photoflex ® .com
Rev 11/20/13
Installing Your FirstStar Lamp Head
9. Loosen the knob on the receiver of the swivel. Figure 11
10. Slide the receiver on to the top of the LiteStand and re-tighten
the knob to secure the FirstStar onto the LiteStand. Figures 12
and 13
11. Loosen the handle with a turn to adjust the tilt of the lamp
head, then tighten when it is in position. Figure 14
12. Screw in the 250 watt lamp. Figure 15
Setting Up Your LiteIgloo
The LiteIgloo comes folded in its own carry bag. A great
advantage of the LiteIgloo over some other shooting enclosures on
the market is that it is collapsible, making storage and transporting
very convenient.
13. Unzip the carry bag holding the LiteIgloo, and remove it from
the bag. Figures 16, 17 and 18
14. Find the open end and lift one of the sides to form a right
angle.
Figures 19
14. Next, grab the edge that is tucked into the center fold of the
LiteIgloo and pull it out until the product pops into shape.
Figure 20 and 20a
15. Now flip over the LiteIgloo so that the opening doors face
forward. The doors open from side to side so the opening
should be vertical. Figure 21
Figure 13 Figure 12
Figure 14 Figure 15
Figure 17 Figure 16
Figure 20a Figure 21
Figure 10 Figure 11
Figure 19 Figure 18
Installing Your Background Sweep
Another great feature of the LiteIgloo is that it comes with white and blue
background sweeps for backgrounds without a horizon. They are secured
in the enclosure with Velcro
® tabs. Since the sweeps have been folded for
packaging, they may need to be ironed or steamed. Be sure to use the
lowest setting on your iron to prevent melting of the nylon fabric. It helps to
spritz the fold with a little water before ironing.
Figure 22
Figure 20