Steps for replacing the toner cartridge, Steps for replacing the toner cartridge -6 – Pantum M5005 User Manual
Page 76
8-6
The steps for replacing the toner cartridge are as follows:
1. Turn off the printer and raise the scanning platform until it is locked.
2. Open the output bin by the upper right ridge of the concave section.
3. Remove the exhausted toner cartridge along the guides.
Note:
Before replacing the toner cartridge, please pay attention to the following:
• The toner cartridge surface may contain toner. Please remove it carefully to avoid
spilling.
• Put the removed toner cartridge on a piece of paper to avoid the toner from
accidently spilling.
• After removing the protective cover, please immediately install the toner
cartridge into the printer, so as to avoid damage from exposure to too much direct
sunlight or indoor light.
• When installing, do not touch the surface of the toner cartridge, so as to avoid
scratching the toner cartridge.
8.2.2. Steps for Replacing the Toner Cartridge